![[]()
Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded and a cross-cut edge that is almost mark-free. The blades run very quietly and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade) superior C-4 carbide teeth are hand-brazed to the plate and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood RIP or CROSSCUT up to 2' thick. They have a 30° Alternate Top Bevel with a 5° Face Hook on 10' diameters and smaller.Saves 1/3 wood loss on each cut.Feeds easily when used for moderate rips and crosscuts on a table saw.Reduces 'JUMP IN' for better 'PULL-CONTROL.'Eliminates bottom splintering on RADIAL CROSSCUTS.With new 30�� ATB tooth style this blade stops totally ALL bottom and top splintering on ply veneers on both radial and table saw machines
- Saves 1/3 wood loss on each cut.
- Feeds easily when used for moderate rips and crosscuts on a table saw.
- Reduces "JUMP IN" for better "PULL-CONTROL."
- Eliminates bottom splintering on RADIAL CROSSCUTS.
- With new 30° ATB tooth style this blade stops totally ALL bottom and top splintering on ply veneers on both radial and table saw machines